Square Stainless Steel Pipe

Length: 1-12 m
Size: 10×10-100×100 mm
Standard: ASTM, JIS, GB, AISI, DIN, BS,EN
Packing: Industry standard packaging or according to client's requirement

+8615562562290

sales9@xhsdsteel.com

E-mail

RELATED PRODUCTS

ONLINE MESSAGE

Product Details

key word : Seamless Steel Pipe

Description

Rectangular tubes are formed from coils and then ran through a series of dies. They are are welded from the inside to form their shape. Rectangular tubes are generally used for maintenance and structural purposes.

For mechanical and structural applications, rectangular hollow sections (RHS) are popular. This is because the flat surface makes it a more economical structural solution for joining and different types of manufacturing work. For soldering or joining, RHS requires minimal edge preparation. Because of the rectangular shape of this type of hollow section, parts only need to be cut straight when joining to other flat surfaces.

Specification&Standard

SIZE mm	WEIGHT kg/m	EST. LBS. PER FT.	SIZE mm	WEIGHT kg/m
SIZE mm	WEIGHT kg/m	EST. LBS. PER FT.	SIZE mm	WEIGHT kg/m	EST. LBS. PER FT.
40 x 20 x 1.60	1.380	0.93	150 x 100 x 6.30	22.400	15.08
40 x 20 x 2.60	2.100	1.41	150 x 100 x 8.00	27.700	18.64
50 x 30 x 1.60	1.880	1.27	150 x 100 x 10.00	35.714	24.04
50 x 30 x 2.60	2.920	1.97	160 x 80 x 3.20	11.500	7.74
50 x 30 x 2.90	3.320	2.23	160 x 80 x 4.00	14.300	9.62
50 x 30 x 3.20	3.490	2.35	160 x 80 x 5.00	17.400	11.71
50 x 30 x 4.00	4.410	2.97	160 x 80 x 6.30	21.400	14.40
60 x 40 x 2.60	3.730	2.51	160 x 80 x 8.00	26.400	17.77
60 x 40 x 2.90	4.230	2.85	160 x 80 x 10.00	32.545	21.87
60 x 40 x 3.20	4.500	3.03	160 x 90 x 4.50	16.600	11.17
60 x 40 x 4.00	5.670	3.82	160 x 90 x 5.60	20.400	13.73
70 x 40 x 2.90	4.690	3.16	160 x 90 x 7.10	25.300	17.03
70 x 40 x 4.00	6.300	4.24	160 x 90 x 8.80	30.500	20.53
80 x 40 x 2.60	4.550	3.06	160 x 90 x 10.00	34.100	22.95
80 x 40 x 2.90	5.140	3.46	180 x 100 x 4.00	16.800	11.31
80 x 40 x 3.20	5.500	3.70	180 x 100 x 5.00	20.500	13.80
80 x 40 x 4.00	6.930	4.66	180 x 100 x 5.60	23.000	15.48
80 x 40 x 5.00	8.470	5.70	180 x 100 x 6.30	25.400	17.09
80 x 40 x 6.30	10.400	7.00	180 x 100 x 7.10	28.600	19.25
90 x 50 x 2.60	5.370	3.61	180 x 100 x 8.80	34.700	23.35
90 x 50 x 3.20	6.640	4.47	180 x 100 x 10.00	38.800	26.11
90 x 50 x 4.00	8.180	5.51	180 x 100 x 12.50	46.900	31.56
90 x 50 x 5.00	10.000	6.73	200 x 100 x 4.00	18.000	12.11
90 x 50 x 6.30	12.300	8.28	200 x 100 x 5.00	22.100	14.20
90 x 50 x 7.10	13.700	9.22	200 x 100 x 6.30	27.400	18.44
100 x 50 x 3.60	7.980	5.37	200 x 100 x 8.00	34.000	22.88
100 x 50 x 4.50	9.830	6.62	200 x 100 x 10.00	40.600	27.32
100 x 50 x 5.60	12.000	8.08	200 x 120 x 4.00	19.300	12.99
100 x 50 x 7.10	14.800	9.96	200 x 120 x 5.00	23.700	15.95
100 x 50 x 8.00	16.400	11.04	200 x 120 x 6.30	29.600	19.92
100 x 60 x 3.20	7.510	5.05	200 x 120 x 8.00	36.500	24.56
100 x 60 x 3.60	8.550	5.75	200 x 120 x 8.80	36.900	24.83
100 x 60 x 4.50	10.500	7.07	200 x 120 x 10.00	45.100	31.62
100 x 60 x 5.60	12.900	8.68	200 x 120 x 12.50	54.700	38.87
100 x 60 x 6.30	13.500	9.09	200 x 120 x 14.20	60.900	43.64
100 x 60 x 7.10	15.900	10.70	220 x 80 x 6.00	26.816	18.02
100 x 60 x 8.80	19.200	12.92	220 x 120 x 6.30	31.600	21.27
100 x 80 x 6.3	16.370	11.02	220 x 120 x 8.00	39.400	26.52
110 x 60 x 3.60	9.050	6.09	220 x 120 x 10.00	46.200	31.09
110 x 60 x 4.50	11.100	7.47	220 x 120 x 12.50	58.700	39.51
110 x 60 x 5.60	13.600	9.15	220 x 120 x 14.20	65.400	44.01
110 x 60 x 7.10	16.800	11.31	250 x 150 x 5.00	29.900	20.12
110 x 60 x 8.80	20.100	13.53	250 x 150 x 6.30	37.300	25.10
110 x 70 x 3.20	8.510	5.73	250 x 150 x 8.00	46.500	31.29
110 x 70 x 4.00	10.800	7.27	250 x 150 x 10.00	56.300	37.89
110 x 70 x 5.00	12.700	8.55	250 x 150 x 12.50	68.300	45.97
110 x 70 x 6.30	15.500	10.43	260 x 140 x 6.30	37.500	25.23
120 x 60 x 3.20	8.510	5.73	260 x 140 x 8.00	46.900	31.56
120 x 60 x 4.00	10.600	7.13	260 x 140 x 10.00	57.600	38.76
120 x 60 x 5.00	13.000	8.75	260 x 140 x 12.50	70.400	47.38
120 x 60 x 6.30	16.100	10.84	260 x 140 x 14.20	78.800	53.03
120 x 60 x 7.10	17.900	12.05	260 x 180 x 6.30	41.500	27.93
120 x 60 x 8.80	21.500	14.47	260 x 180 x 8.00	52.000	35.00
120 x 80 x 3.20	12.100	8.14	260 x 180 x 10.00	63.900	43.00
120 x 80 x 6.30	17.500	11.78	260 x 180 x 12.50	78.300	52.70
140 x 70 x 4.00	12.500	8.41	260 x 180 x 14.20	87.700	59.02
140 x 70 x 5.00	15.400	10.36	300 x 100 x 5.00	30.268	20.34
140 x 70 x 6.30	19.000	12.79	300 x 100 x 8.00	47.679	32.04
140 x 70 x 7.10	21.200	14.27	300 x 100 x 10.00	58.979	39.63
140 x 70 x 8.80	25.600	17.23	300 x 200 x 5.00	37.800	25.44
140 x 80 x 3.20	10.500	7.07	300 x 200 x 6.30	47.100	31.70
140 x 80 x 4.00	13.100	8.82	300 x 200 x 8.00	59.100	39.77
140 x 80 x 5.00	16.200	10.90	300 x 200 x 10.00	72.000	48.46
140 x 80 x 6.30	20.000	13.46	300 x 200 x 12.00	88.000	59.22
140 x 80 x 8.00	24.800	16.69
140 x 80 x 10.00	30.200	20.32
150 x 100 x 3.20	12.000	8.08
150 x 100 x 4.00	14.900	10.03

Dimensional Tolerances

Dimensional Tolerances
Outside Diameter:		Twist:	Maximum twist per 3 feet of length
Largest outside dimension	Outside tolerance including convexity and concavity	Longest outside dimension
up to 2 1/2"	±.020"	2" to 2 1/2"inclusive	.062"
over 21/2" to 31/2" inclusive	±.025"	over 21/2" to 4" inclusive	.075"
over 31/2" to 51/2" inclusive	±.030"	over 4" to 6" inclusive	.087"
over 51/2"	±1%	over 6" to 8" inclusive	100"
Tolerances include allowance for convexity or concavity. For rectangular sections, the tolerance calculated for the larger flat dimension shall also apply to the smaller flat dimension. This tolerance may be increased 50 percent when applied to the smaller dimension, if the ratio of cross sectional dimension is between 1.5 and 3, and 100 percent when the ratio exceeds 3.		over 8"	112"
		Straightness: Permissable variation shall be 1/8" times the number of feet of total length divided by 5:
		.125" x (total length) ÷ 5
Wall Thickness:		Squareness of Sides:
Maximum allowable variation	±10%	Adjacent sides may deviate from 90° by a tolerance of plus or minus 2 degrees maximum.
(wall thickness is to be measured at the center of the flat, exclusive of the weld area, and not at the corners)
Worner Radii:		Flash:
The radius of any outside corner shal not exceed three times the specified wall thickness		Structural tubing usually is supplied flash-in. The height of the flash will vary with the wall thickness of the tube.

ASTM A500 Grade B,

ASTM A513 (1020-1026)

ASTM A36 (A36)

EN 10210:S235,S355,S235JRH,

S355J2H,S355NH

EN 10219:S235,S355,S235JRH,

S275J0H, S275J2H, S355J0H, S355J2H

ASTM A500 Cold Formed Welded and Seamless Carbon Steel Steel Structural Tubing in Round and Shapes

Grade Designation	Chemistry-Ladle Analysis
Grade Designation	Carbon	Manganese	Phosporous	Sulfur
A501 (A36)	0.26% max	-	0.04% max	0.05% max
A500A	0.26% max	-	0.04% max	0.05% max
A500B	0.26% max	-	0.04% max	0.05% max
A500C	0.23% max	1.35% max	0.04% max	0.05% max
Copper, when copper steel is specified, 0.20% minimum.
Mechanical Properties
Grade Designation	Grade	Tensile Strength	Yield Strength Minimum	Elongation In 2 Inches Minimum
Grade Designation	Condition	Minimum	Yield Strength Minimum	Elongation In 2 Inches Minimum
A501 (A36)	Hot Formed	58,000 psi	36,000 psi	23%
A500A	Cold Formed	45,000 psi	39,000 psi	25%
A500B	Cold Formed	58,000 psi	46,000 psi	23%
A500C	Cold Formed	62,000 psi	50,000 psi	21%

Chemical composition

Steel Grade: Q195, Q215, Q235, Q345, S235JR, S275JR, SS4007

Data	Elements（%）
Materal Grade	C	Mn	S	P	Si
Q195	0.06-0.12	0.25-0.50	<0.05	<0.045	<0.30
Q215	0.09-0.15	0.25-0.55	<0.05	<0.045	<0.30
Q235	0.12-0.20	0.30-0.70	<0.045	<0.045	<0.30
Q345	<0.20	1.0-1.6	<0.04	<0.04	<0.55

Mechanical property

Materal Grade	Yield point (Mpa)	Tensile Strength (Mpa)	Elongation(%)
Q195	>195	315-430	32-33
Q215	>215	335-450	26-31
Q235	>235	375-500	24-26
Q345	>345	470-630	21-22

Tolerance:

Length	+/- 50 MM
Wall Thickness	+/- 12.5%
Weight	+/- 8%

FACTORY APPEARANCE

STORAGE VIDEO

APPLICATION FIELD

Our main manufactures are stainless steel, galvanized steel, carbon steel and etc. That apply to engineering, coal mine, textile, electric power, boiler, machinery, We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. We′re pleased to get your Inquiry and we will come back to as soon as possible.

mechanical

boiler plant

power plant

Chemical plant

Oil Pipelines

refrigeration equipment

Water pipes

Bearing

chemical plant

Natural Gas Pipeline

QUALITY INSPECTION

We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. We′re pleased to get your Inquiry and we will come back to as soon as possible.